Site Hırdavat HARDES® 22mm Air Oxygen Sensor Socket 3/8" Socket

Oxygen sensor (lambda) socket 22mm 3/8” Used to dismantle oxygen sensors (lambda) holding 22 keys

Suitable for use with both air tools and manual hand tools

Its slit structure is convenient for the wiring of the oxygen sensor to pass through

When the sensor is installed, the cable is spirally wound around the socket

It is removed by stripping from here The full length of the lokma is 80 mm. The outer diameter of the lokma is 32 mm 3/8” (9

It has a 5 mm) socket The t-handle and ratchet handles you have should also be 3/8” If the t-handle or ratchet handle you have measures 1/2”, then 1/2” You can still use it with a 3/8” adapter aid One edge of the square-shaped ends of the arms in your hand 12 If it comes 5 mm, it is 1/2”, 9

If it comes 5 mm means it is 3/8”

You can check whether the width of the six-cornered part of the sensor socket is 22mm to understand whether it is suitable for your car

However, it may be incompatible with some sensors that rarely hold 22 keys. You can also use it by attaching corner sockets under 26 mm on the back of sensors that are difficult to disassemble. Made of chrome vanadium steel (cr

V) manufactured Exterior is black oxide finish